ECHL water-carrying model - 3D

Heating coil made of 2 CU tubes, one above the other.
15x1mm material: 99.9% copper content.
With pressed-on, trapezoidal CU fins
0,2mm. Material: 99.9% copper content.

Delivery length: 2500mm

Basic wall panel made of 2mm aluminium.
Material: AIMg3. Powder coating on both sides
powder coating RAL- 9016 pure white
Available in all RAL colours.
With pre-punched fixing holes.

L: 2500mm D: 30mm H: 270mm

Inside corner with 2 mitre cuts each 45°.
made of 2mm aluminium. Material AIMg3,
powder coating on both sides RAL- 9016 pure white
"available in all RAL colours.
With pre-punched fixing hole 8.5mm.

L: 2x150mm each 45° D: 30mm H: 270mm

Outside corner with 2 mitre cuts 45° each
made of 2mm aluminium. Material AIMg3.
Powder coating on both sides RAL- 9016 pure white.
"available in all RAL colours.
With pre-punched fixing hole 8.5mm.

L: 2x150mm each 45° D: 30mm H: 150mm

End pieces edged in 2mm aluminium,
material: AIMg2 , powder coating on both sides
RAL- 9016 pure white "available in all RAL-colours".
1 pair = left + right

Cover panel "pulled" from 2mm aluminium
Material: AIMg3. For all baseboard models.
Powder coating on both sides RAL- 9016 pure white.
"Available in all RAL colours.

L: 2500mm H: 100mm D: 8mm

Cover panel "drawn" with 2 mitre cuts
45° for outside corners. Consisting of 2mm aluminium.
Material: AIMg3, suitable for all heating models.
Powder coating on both sides RAL- 9016 pure white.
"Available in all RAL colours

L: 2x620mm each 45° D: 8mm H: 10mm

Cover panel "pulled" from 2mm aluminium.
Material: AIMg3 with stand opening 45mm round.
For the passage of a TH sensor.
Powder coating RAL-9016 "available in all RAL colours".

L: 620mm H: 100mm D: 8mm

Plastic brackets 2-pcs. for
heating coil and cover panel incl.
fastening: collar dowel 6mm
and screws galv. 4x40mm

Fastening set for basic wall panel.
Consisting of plastic collar dowel
8mm and screws galvanised 5 x 50 mm

Butt connector for cover panel made of 3mm
untreated aluminium.

Dimensions: 100mm x 50mm x 3mm

Butt connector for basic wall panel
BSEC-3 and BSEC-3D made of 1mm
aluminium, untreated.

Dimensions: 100mm x 26mm x 1mm

Deflection and expansion compensator
to absorb the expansion of the heating coils.

Material : VA
Connection: 3/8" threaded connection with seal
x 3/8" ET for press or solder fittings

Angle rail to cover max. 25mm
expansion joints between wall and
floor area. Made of 1mm aluminium AIMg1.
Suitable for ECHL-3 ECHL-3D ECHL-3L
and ECHL-3DL.
Powder coating on both sides RAL-9016 pure white.
"Available in all RAL colours

L: 2500mm H: 25mm D: 25mm