Water-bearing model ECHL - 3
Tender texts
Download information
No. 100 Type: HREC
Heating coil made of 2 CU tubes, one above the other.
15x1mm material: 99,9% copper content.
With pressed-on, trapezoidal CU - fins
0,2mm. Material: 99,9% copper.
Length: 2500mm
No. 200 Type: BWEC-3
Basic wall panel made of 2mm aluminium
Material: AIMg3 . Powder coating on both sides
RAL- 9016 pure white
"Available in all RAL colours.
With pre-punched fixing holes.
L: 2500mm D: 30mm H: 150mm
No. 201 Type: IEEC-3
Inside corner with 2 mitre cuts each 45°.
made of 2mm aluminium. Material AIMg3,
powder coating on both sides
RAL- 9016 pure white
"available in all RAL colours". With pre-punched
mounting hole 8,5mm.
L: 2x150mm each 45° D: 30mm H: 150 mm
No. 202 Type: AEEC-3
Outside corner with 2 mitre cuts 45° each
made of 2mm aluminium. Material AIMg3, powder coating on both sides.
RAL- 9016 pure white
"available in all RAL colours".
With pre-punched fixing hole 8.5mm.
L: 2x150mm each 45° D: 30mm H: 150mm
No. 203 Type: ESEC-3
End pieces edged in 2mm aluminium,
material: AIMg2 , powder coating on both sides
RAL- 9016 pure white "available in all RAL-colours".
1 pair = left + right
No. 300 Type: ABEC
Cover panel "pulled" from 2mm aluminium
Material: AIMg3. For all baseboard models.
Powder coating on both sides RAL- 9016 pure white.
"Available in all RAL colours.
L: 2500mm H: 100mm D: 8mm
No. 303 Type: AEBAEC
Cover panel "drawn" with 2 mitre cuts
45° for outside corners. Consisting of 2mm aluminium.
Material: AIMg3, suitable for all heating models.
Powder coating on both sides RAL- 9016 pure white.
"Available in all RAL colours
L: 2x620mm each 45° D: 8mm H: 10mm
No. 310 Type: ABTHEC
Cover panel "pulled" from 2mm aluminium.
Material: AIMg3 with stand opening 45mm round.
For the passage of a TH sensor. Powder coating
RAL-9016 "available in all RAL colours".
L: 620mm H: 100mm D: 8mm
No. 700 Type: HKEC
Plastic brackets 2-pcs. for
heating coil and cover panel incl.
fastening: collar dowel 6mm
and screws galv. 4x40mm
No. 710 Type: BBWEC
Fastening set for basic wall panel.
Consisting of plastic collar dowel
8mm and screws galvanised 5 x 50 mm
No. 720 Type: STVEC-1
Butt connector for cover panel made of 3mm
untreated aluminium.
Dimensions: 100mm x 50mm x 3mm
No. 730 Type: STVEC-2
Butt connector for basic wall panel
BWEC-3 and WSEC-3D made of 1mm
aluminium, untreated.
Dimensions: 100mm x 26mm x 1mm
No. 740 Type: UKEC
Deflection and expansion compensator
for expansion absorption of the heating coils.
Material : stainless steel 1.4404, nut 3/8″ brass nickel-plated.
Operating temperature -30°C to +180°C
Nominal pressure: 16 bar Burner pressure: 60 bar
Connection: 3/8" screw connection with seal
x 3/8" male for press or solder fittings
No. 750 Type: WSEC-1
Angle rail to cover max. 25 mm expansion joints between wall and floor.
expansion joints between wall and floor area.
Made of 1mm aluminium AIMg1.
Suitable for ECHL-3 ECHL-3D ECHL-3L
and ECHL-3DL.
Powder coating on both sides RAL-9016 pure white.
"Available in all RAL colours
L: 2500mm H: 25mm D: 25mm
Material per linear metre ECHL-3
No. 100 - 1m
No. 200 - 1m
No. 300 - 1m
No. 700 - 2pcs
No. 710 - 2pcs